Thermador PODM301 User Manual download pdf (Page 26)

English 23

To replace the halogen bulb on the oven ceiling:

Removing the Oven Door

To remove the oven door:

To replace the oven door:

1. Turn off power to the

oven at the main

power supply (fuse or

breaker box).

2. Remove the glass

cover by unscrewing

it.

3. Remove the halogen

bulb and replace.

Grasp the new bulb

with a clean, dry cloth.

4. Screw the glass cover

back on.

5. Turn power back on at

the main power supply

(fuse or breaker box).

CAUTION:

When removing the door:

• Make sure oven is cool and power to the

oven has been turned off before

removing the door. Failure to do so could

result in electrical shock or burns.

• The oven door is heavy and fragile. Use

both hands to remove the oven door. The

door front is glass. Handle carefully to

avoid breaking.

• Grasp only the sides of the oven door. Do

not grasp the handle as it may swing in

your hand and cause damage or injury.

• Failure to grasp the oven door firmly and

properly could result in personal injury or

product damage.

• To avoid injury from hinge bracket

snapping closed, be sure that both levers

are securely in place before removing the

door. Also, do not force door open or

closed - the hinge could be damaged and

injury could result.

• Do not lay removed door on sharp or

pointed objects as this could break the

glass. Lay on a flat, smooth surface,

positioned so that the door cannot fall

over.

1. Be sure to read the

above CAUTION

before attempting to

remove the door.

2. Open the door

completely.

3. Flip levers on hinges

toward you.

4. Holding the door firmly

on both sides and

using both hands,

close the door gently

until it stops against

the levers, about 30º

from the closed

position.

5. Carefully lift the door

up and out of the

hinge slots. Hold

firmly; the door is

heavy.

6. Place the door in a

convenient and stable

location for cleaning.

1. Hold the door firmly in

both hands.

2. Hold the door at a 30º

angle from the closed

position and insert

hinges into the slots.

You may need to rock

the door forward and

backward slightly to

seat the hinge feet.

3. The door may need to

be removed and re-

inserted until the

hinges sit correctly in

the slots.

4. Open door all the way

to expose hinges,

levers, and slots.

5. Push levers forward

and down until seated

on the bracket.

6. Close and open door

slowly to be sure it is

correctly and securely

in place. Door must be

straight, not crooked.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 107 108

Comments to this Manuals

No comments