Thermador HPCN36NS Installation Manual download pdf (Page 4)

English 2

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

Ensure appliance is properly installed and grounded by a

qualified technician. Installation, electrical connections and

grounding must comply with all applicable codes.

If required by the National Electrical Code (or Canadian

Electrical Code), this appliance must be installed on a

separate branch circuit.

Appliance Handling Safety

Related Equipment Safety

Never modify or alter the construction of the appliance. For

example, do not remove panels, wire covers or brackets/

screws.

When cutting or drilling into wall or ceiling, be careful not to

damage electrical wiring and other hidden utilities.

Use a quali¿ed and trained installer.

Safety Codes and Standards

This appliance complies with one or more of the following

Standards:

• UL 507, The Standard for the Safety of Electric Fans

• CSA C22.2 No. 113, Fans and Ventilators

It is the responsibility of the owner and the installer to

determine if additional requirements and/or standards

apply to specific installations.

Ventilation Safety

WARNING!

To reduce the risk of fire or electric shock, do not use

this appliance with any solid-state speed control

devices.

CAUTION!

Unit is heavy and requires at least two

people or proper equipment to move and

install.

Hidden surfaces may have sharp edges.

Use caution when handling the appliance.

Failure to do so may result in property

damage or personal injury.

CAUTION!

FOR GENERAL VENTILATING USE ONLY. Do not use

to exhaust hazardous or explosive materials and vapors.

To reduce the risk of fire, use only metal ductwork.

WARNING!

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,

OR INJURY TO PERSONS, OBSERVE THE

FOLLOWING:

• Installation work and electrical wiring must be done

by qualified person(s) in accordance with all

applicable codes and standards, including fire-rated

construction.

• Sufficient air is needed for proper combustion and

exhausting of gases through the flue (chimney) of

fuel burning equipment to prevent back drafting.

Follow the heating equipment manufacturer's

guideline and safety standards such as those

published by the National Fire Protection

Association (NFPA), and the American Society for

Heating, Refrigeration and Air Conditioning

Engineers (ASHRAE), and the local code

authorities.

• Use only metal ductwork.

• Ducted fans must always be vented to the outdoors.

Do not vent exhaust air into spaces within walls,

ceilings, attics, crawl spaces or garages.

• When cutting or drilling into wall or ceiling, do not

damage electrical wiring and other hidden utilities.

1 2 3 4 5 6 7 8 9 ... 62 63

Comments to this Manuals

No comments

Thermador HPCN36NS Installation Manual Page 4

Comments to this Manuals

Related products and manuals for Cooker hoods Thermador HPCN36NS