Thermador HPCN36NS Installation Manual download pdf (Page 21)

English 19

User Servicing and Installer Checklist

Before Calling Service

See Use and Care Guide for troubleshooting information.

Refer to the Warranty in the Use and Care Guide. Please

be prepared with the information printed on your product

data rating plate when calling (see Figure 29).

To reach a service representative, see the contact

information at the back of the manual. Please be prepared

with the information printed on your product data rating

plate when calling (see Figure 29).

Keep your invoice or escrow papers for warranty validation

if service is needed.

Product Data Rating Plate

The data rating plate shows the model and serial number. It

is located under the filter.

Installer Checklist

F Specified clearances maintained to cooking surface.

F Appliance is level.

F All packaging material removed.

F Receptacle with correct over-current protection is

provided for service cord connection.

F Proper ground connection.

F Owner is aware of location of the main circuit breaker.

F INSTALLER: Write the model number and serial

number found on the Data Rating Label Plate in the

USE AND CARE GUIDE. Leave the USE AND CARE

GUIDE

and the INSTALLATION MANUAL with the owner

of the appliance.

To Clean and Protect Exterior Surfaces

• Stainless steel may be cleaned by wiping with mild,

soapy water and a soft cloth. Always wipe and dry in

the direction of the stainless steel grain. Rinse with

clear water and dry with a soft cloth.

• For discolorations or deposits that persist, refer to the

Use and Care Guide.

• To polish and protect stainless steel, apply a stainless

steel conditioner with a soft cloth. The Thermador

Stainless Steel Conditioner is available for purchase in

the online eShop (www.thermador-eshop.com). Order

part number 00576697.

• DO NOT allow deposits to remain for long periods of

time.

• DO NOT use ordinary steel wool or steel brushes.

Small bits of steel may adhere to the surface causing

rust.

• DO NOT allow salt solutions, abrasive sponges or

cleaners, disinfectants, bleaches or cleaning

compounds to remain in contact with stainless steel for

extended periods. Many of these compounds contain

chemicals which could prove harmful. Rinse with water

after exposure and wipe dry with a clean cloth.

Figure 29: Data Rating Plate Location

Filters

Data Rating

Plate

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 62 63

Comments to this Manuals

No comments

Thermador HPCN36NS Installation Manual Page 21

Comments to this Manuals

Related products and manuals for Cooker hoods Thermador HPCN36NS