Thermador HPCN36NS Installation Manual download pdf (Page 14)

English 12

Wire Connection

Wire Routing

1. Run a 120V AC, 15 amp circuit power cable from the

service panel through one of the holes in the top plate.

2. Connect black wire to power supply black wire, white

wire to power supply white wire and green wire to

green wire or bare wire.

3. Place all wiring connections inside the junction box

channel. Reinstall on the top plate. Ensure that the

wires are secure and that no wires are pinched.

EXTNCB25 Blower Connection Cable

(optional)

Blower Extension Cable Connection

The internal blower harness should be routed through the

knockout and secured with a 1” (25.4 mm) strain relief. The

remote harness can then be connected to the blower

harness outside the unit (refer to Figure 11).

IMPORTANT:

Cutting of the connector will void the warranty of the

appliance.

The blower extension cable is compatible with the

following Inline & Remote blowers:

Figure 11: Route Wire

Figure 12: Wire Connection

Route Wire

White to white

Black to black

Green to green

or bare wire

PARTS INCLUDED:

1 – 25ft cable

2 – Adapter Cables

(NOT NEEDED for

HPCN or HPCB

models)

Figure 13: Optional Blower Connection Cable

BLOWER SKU

Remote Blower VTR630*

Remote Blower VTR1030*

Remote Blower VTR1330*

Inline Blower VTI610*

Inline Blower VTI1010*

*Indicates a letter designating the release year.

25ft cable

Connects

to Hood

Connects to

Remote or

Inline blower

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 62 63

Comments to this Manuals

No comments

Thermador HPCN36NS Installation Manual Page 14

Comments to this Manuals

Related products and manuals for Cooker hoods Thermador HPCN36NS