Thermador PRD364NLGU Use and Care Manual download pdf (Page 25)

English 20

Using the Electric Griddle

(available on some models)

Description

The built-in griddle is made of restaurant-quality aluminum

with a non-stick coating (PTFE/PFOA free). This produces

a surface with even heat that is easy to clean.

A maple chopping block (PA12CHPBLK), stainless steel

cover (PA12CVRJ), and coated-aluminum grill plate

(PA12GRILLN) are available as accessories and are

purchased separately. The maple chopping block and

stainless steel cover are sized to fit on top of the surface

when the griddle is not being used. The coated-aluminum

grill plate accessory is designed to replace the griddle

plate. See the instructions that come with the accessory for

details.

The maple chopping block and stainless steel cover must

be removed before turning the griddle on.

The griddle plate (or grill plate accessory) must always be

in place when the griddle is turned on.

• The electric griddle element is rated 120 volts AC,

1,630 watts.

• The griddle is electronically controlled with

temperatures marked on the knob from 150 – 500°F

(66 – 260°C).

• There are no fixed settings on the knob.

• Press and turn the knob clockwise to the temperature

setting.

Preparing the Griddle

If the range is equipped with an electric griddle, check the

griddle frame adjustment by pouring two tablespoons of

water on the back of the griddle plate. The water should

slowly roll into the grease tray. If not, adjust the two screws

under the back of the frame. Start with one half turn

counterclockwise (CCW) of the screws. Further adjustment

should be made by one-quarter turn until water slowly flows

into the grease tray (Figure 21).

The griddle plate should be washed with warm soapy water

then rinsed with clear water prior to use.The griddle may be

used without any butter, margarine or oil. However, a very

small amount may be used to flavor foods.

Any utensil may be used on the griddle surface. Care

should be taken that the surface is not gouged when

utensils are used. DO NOT cut directly on the griddle plate.

CAUTION!

The griddle element is hot after use. Allow sufficient time

for griddle components to cool before cleaning.

WARNING!

To avoid risk of injury, NEVER operate griddle without

the griddle plate installed. NEVER use griddle in a

manner that is not prescribed by the Use and Care

Guide.

Figure 20: Griddle Control Knob

LIG

OFF

Figure 21: Griddle Plate Leveling Screws

Move griddle

plate to the side

and turn leveling

screws

Move griddle

plate to the side

and turn leveling

screws

Move griddle

plate to the side

and turn leveling

screws

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 52 53

Comments to this Manuals

No comments

Thermador PRD364NLGU Use and Care Manual Page 25

Comments to this Manuals

Related products and manuals for Barbecues & grills Thermador PRD364NLGU