Thermador PRD364NLGU Use and Care Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 53
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
English 14
Electronic Single Point Ignition
Each STAR
®
burner has its own electronic igniter that
sparks when the burner is turned on. Each burner should
light in 4 seconds or less. If a burner does not light, check
to see that the burner cap is positioned correctly on the
base.
Checking Burner Cap Placement
Check each burner to make sure there is no gap
between the burner cap and burner base. See
Figure 11 and Figure 12 for examples of correct and
incorrect placements of the burner cap.
You may gently try to move the burner caps from side
to side to check if the caps are properly placed on the
burner bases. When properly placed, each burner cap
will rest flat on top of its burner base, and completely
cover the star-shape of the burner base when viewed
from the top as shown in Figure 11.
Automatic Re-Ignition
If any one or more burners blow out, the electronic igniter
automatically activates to re-light the flame. DO NOT touch
the STAR burners when the igniters are active.
IMPORTANT:
For proper combustion, DO NOT use the cooktop
without the burner grates in place.
There is a slight sound associated with gas combustion
and ignition. This is normal.
On cooktops using propane (LP) gas, a slight “pop”
sound may be heard from the STAR burner ports a few
seconds after the burner has been turned off.
Figure 10: STAR Burner Components
CAUTION!
DO NOT touch the STAR burners when the igniters are
sparking. Ensure that the knobs are set to OFF and the
burners and caps have cooled before touching.
WARNING!
To prevent flare-ups and avoid the creation of harmful
by-products, do not use the rangetop without all burner
caps and all burner grates properly positioned.
Igniter
Igniter
Igniter
Burner Cap
Burner Cap
Burner Cap
Burner Base
Burner Base
Burner Base
Figure 11: Correct Burner Cap Placement
Figure 12: Incorrect Burner Cap Placement
Star
®
Star
®
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 52 53

Comments to this Manuals

No comments