Thermador VCIN36JP Installation Manual download pdf (Page 24)

English 22

c) Secure to the sides of the housing framework using

six (6) x 2” (50.8 mm) mounting screws, 3 per side

as indicated in Figure 27.

7. Connect to ductwork

8. Connect electric

a) Remove the junction box cover (see Figure 5 on

page 11).

b) Remove circular knock-out holes located on back

side of the insert (see Figure 5 on page 11).

c) Connect wiring for applicable blower motor (see

blower instructions beginning on page 11).

d) Ensure all controls are in the OFF position. Plug

electrical cord into grounded outlet.

9. Install hood filters, filter spacers, and grease trays

a) Refer to “Installing Grease Trays, Filter Spacers,

and Filters” on page 28.

10. Test the installation

a) Test the operation of the blower and the lights.

b) Be sure to check for backdraft. With the blower on

high, close the windows and doors to the area to

ensure that fan does not cause back drafting in any

outlet vent for another appliance.

Figure 27: VCIN Side Screws

2” (50.8 mm)

mounting screws

X3 per side

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 95 96

No comments

Thermador VCIN36JP Installation Manual Page 24