Thermador PH36 User Manual download pdf (Page 9)

English 7

Lights

Note:

Turn off the lights and fan. Allow the lights to cool before

handling. If new lights do not operate, be sure lights are

inserted correctly before calling for service.

Halogen Light Replacement

(some models)

• Using a flat edge from a screwdriver or equivalent tool,

pry loose the lens cover as shown in Figure 4.

• Remove the damaged light and replace with a new

12 Volt, 20 Watt (maximum) halogen light made for a

G-4 base. Some hoods use 120 V, 40 W (maximum)

bulbs with G-9 base. Follow package directions and do

not touch new light with bare hands.

• Reinstall the light and cover.

Heat Lamp Replacement (some models)

• Turn heat lamp counterclockwise to remove.

• Replace lamp with either a PAR-38 175W heat lamp or

a PAR-40 250W heat lamp.

The PAR-38 175W heat lamp provides a tighter seal within

the enclosure and produces the same amount of effective

heat with lower energy consumption. These lamps may not

be readily available at local retail outlets. The PAR-40

250W heat lamp is more widely available. It can be used

instead.

PAR-38 175W heat lamps can be purchased through the

following retailers:

• OpTech Inc: 800-848-6624 or

www.optechlightbulbs.com

• bulbs.com: 888-455-2800 or www.bulbs.com

Figure 4: Halogen Light Replacement

Figure 5: Heat Lamp Replacement

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

No comments

Thermador PH36 User Manual Page 9