Thermador HPIN42WS Installation Guide download pdf (Page 15)

Page. 15

Blower Motor Installation

Blower and Circuit Breaker Ratings

CAUTION

To reduce the risk of fire and electric shock, install this

range hood only with the blowers listed in the

Ventilation Planning Guide.

NOTE: Cutting the plug of the blower will void the

warranty or eligibility for return or exchange.

All blower models are sold separately. Use only

Thermador blowers with these ventilation hoods. See the

Ventilation Planning Guide for recommended blowers.

Contact Customer Service for additional options.

All hood models are rated for 120V AC installed with a

blower listed in the table above, using a 15 amp

dedicated circuit breaker. The VTR1330 blower in

conjunction with a PHxxGWS requires a 20 amp circuit

breaker.

Blower selection will vary based on the volume of air that

needs moved and the length and location of the duct run.

For long duct runs with multiple turns and bends, consider

using a more powerful blower. For the most efficient air

flow exhaust, use a straight run or as few elbows as

possible (refer to “Ductwork Preparation”).

Installing an Integral Blower

Integral Blower models are integrated into the hood at the

time of installation. Integral Blower models should be

installed after the hood is mounted.

For complete installation instructions see the instructions

supplied with the blower unit.

Blower Harness Routing and Connection

1. The blower is attached to the hood using weld studs

provided on the mounting plate. Guide the motor

mounting plate over the studs.

2. Attach four (4) nuts (included with hood) to the weld

studs. Tighten nuts with a 11/32'' nut driver to secure

the blower to the hood.

Blower SKU Voltage Current

Breaker

Amp

Remote VTR630 120 4.2 15

Remote VTR1030 120 5.7 15

Remote VTR1330 120 8.5 15 / 20

In-line VTI610 120 4.2 15

In-line VTI1010 120 5.7 15

Integral VTN630 120 4.2 15

Integral VTN1090 120 5.4 15

10⅞" 10⅞"

(275)(275)

13⅛"

(335)(335)

8¼"

(208)

8¼"

(208)

18⅞"

(473)(473)

inches (mm)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 64 65

Comments to this Manuals

No comments

Thermador HPIN42WS Installation Guide Page 15

Comments to this Manuals

Related products and manuals for Cooker hoods Thermador HPIN42WS