Thermador HMIB40HS User Manual download pdf (Page 8)

8

OPERATION

IMPORTANT: The most effective method of

removing vapors produced during cooking

is to:

K Switch the ventilator ON prior to

cooking or as soon as you begin

cooking.

K Switch the ventilator OFF

a few minutes after you have ﬁnished

cooking.

Acoustic signal:

K When a button is pressed, this is veriﬁed

by an acoustic signal.

Switching off the acoustic signal:

K Simultaneously press buttons 0 and +

until a signal is emitted after approx.

3 seconds.

Switching on the acoustic signal:

K Repeat the process.

Switching the fan ON

K Press the + button or pull out the ﬁlter

drawer.

Setting the required fan speed:

K Press the + button.

The fan speed is increased by one step.

K Press the – button.

The fan speed is reduced by one step.

Switching the fan OFF:

K Press the 0 button.

The displayed

{ goes out shortly

afterwards.

Or:

K Keep pressing the – button until the fan

switches off.

The displayed

{ goes out shortly

afterwards.

Intensive setting:

Maximum power is obtained at the

intensive setting.

It is only required for short intervals.

K Keep pressing the + button until a ç

appears in the display.

K If the intensive setting is not cancelled by

hand, the

fan will automatically switch back to step

} after 10 minutes.

Delayed Shut Off:

K Press the ! button or push in the ﬁlter

drawer.

The fan runs for 10 minutes at setting 1.

At the same time a dot ﬂashes in the

display.

Then the fan switches off automatically.

Lighting:

K Brieﬂy press the a button to switch the

light on and off.

K The light can be switched on at any

time, even though the fan is switched off.

K Adjusting the brightness:

Hold down the

a button until the

desired brightness is obtained.

Light Reduce fan

speed

Fan ON and

increase speed

Display for fan setting

Delayed Shut

Off

Fan OFF

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Comments to this Manuals

No comments