Thermador SGSL365KS Installation Manual download pdf (Page 9)

English 4

NOTE:

All measurements given have to be precisely followed. If

nonstandard cabinets are used, make sure they are

installed with minimum dimensions shown in Figure 1 and

Figure 2.

Plan the installation of the unit so that the power cord, gas

shut-off valve and gas pressure regulator are accessible

from the front of cabinet.

Countertop Requirements

Mounting Requirements

Use the mounting brackets supplied. See “Install the

Cooktop” on page 5 for further details.

Ventilation Recommendations

We strongly recommend the installation of a ventilation

hood above this appliance. The hood must be installed

according to instructions furnished with the hood.

Note: The appliance should not be installed with a

ventilation system that blows air downward toward the

burners. This type of ventilation system may cause ignition

and combustion problems with the gas cooking appliance

resulting in personal injury or unintended operation.

Figure 1: Installed Dimensions (from Cooktop Edges)

Depth from Back Wall

Cabinet 13" (33cm) max.

Hood Depth - 24" (61cm) max.

Centered Over Cooktop

Rear Wall - 2" (5cm)

Right Side

12" (30cm) min.

Left Side

12" (30cm) min.

18" (46cm) min.

Above Counter - 30" (76 cm) min. to

Combustible Surface

SGS(X)30 - 30" (76cm) min.

SGS(X)36 - 36" (91cm) min.

Figure 2: Cutout Dimensions

30” Models

36” Models

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

No comments

Thermador SGSL365KS Installation Manual Page 9