Thermador CIT36XKBB User's Guide download pdf (Page 13)

172

INDUCTION COOKTOPS

PLANNING INFORMATION

MODEL OPTIONS

There are two sizes of induction cooktops to choose from—

30-inch and 36-inch. Models are available in our original black nish

as well as our silver mirrored nish for those who want a bold, striking

alternative that goes perfectly with stainless steel appliances. Be sure

to reference the correct model information in this design guide.

INSTALLATION CONSIDERATIONS

The information in this design guide provides key features, product

dimensions, cutouts and installation specications. Before installing

a Thermador Induction Cooktop, be sure to verify the cutout

dimensions and electrical connections. Also, always consult with the

installation manual packed with the product for complete details

before installing.

36" Thermador Induction Cooktops may be installed above a

Thermador Single Built-in Oven. A minimum 1" air gap must be

maintained between the bottom of the cooktop and the top of the

oven. See below for approved cooktop over oven installation.

MODEL

APPROVED COOKTOP OVER

THERMADOR OVEN INSTALLATION

CIT36XKB •

CIT36XKBB •

CIT365KB •

CIT365KM •

CIT365KBB •

CIT304KB

CIT304KM

CIT304KBB

Cooktops that are not listed above, must be approved under local code and / or

by the local authority having jurisdictions.

Thermador Cooktops may also be installed above a Thermador

Warming Drawer to create a convenient cooking center. Refer to the

warming drawer section for additional specications.

IMPORTANT

We strongly recommend the installation of a Thermador Ventilation

System with this induction cooktop.

Seal the surfaces of the cutout to make them heat resistant. This

prevents the surfaces from expanding as a result of humidity.

Solid surface countertops often require special installation. For

example, heat reective tape or rounded corners may be necessary.

Contact the countertop manufacturer for instructions specic

to your countertop.

WARNING

To reduce the risk of ignition of nearby combustible materials, install

the countertop with a minimum distance of 2" (51 mm) from both side

walls and the back wall.

IMPORTANT: Local Codes may vary; installation, electrical

connections and grounding must comply with all applicable local

codes. If required by the National Electrical Code (or Canadian

Electrical Code), this appliance must be installed on a separate

branch circuit.

ELECTRICAL LOCATION

The junction box must be located within 3 feet (~900 mm) of the

cooktop connection. It should be easily accessible for service

purposes.

/8" max (79 mm) + Fitting/Conduit 0.9" (23 mm)

Connection

(“J”) box

Conduit approx. 3 ft. (

900 mm)

12" approx. (300 mm)

1" min (26 mm) air clearance

ELECTRICAL SPECIFICATIONS

Be sure your appliance is properly installed and grounded by a

qualied technician. Installation, electrical connections and grounding

must comply with all applicable local codes.

All induction cooktops are dual rated, designed to be connected to

either 240 / 208V AC, 60 Hz, 3-wire, single-phase power supply.

Install a suitable conduit box (not furnished). An appropriately-sized,

UL-listed conduit connector must be used to correctly attach the

conduit to the junction box.

MODEL REQUIRED CIRCUIT BREAKER

240 / 208V, 3-Wire, 50 / 60 Hz

CIT36XKB 40 A

CIT36XKBB 40 A

CIT365KB 50 A

CIT365KM 50 A

CIT365KBB 50 A

CIT304KB 40 A

CIT304KM 40 A

CIT304KBB 40 A

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Thermador CIT36XKBB User's Guide Page 13

Comments to this Manuals

Related products and manuals for Cookers Thermador CIT36XKBB